top of page

Dimensions: seat depth 17", length 51 1/2" – note that the length is the standard option, and we can generally supply to your own requirements, often at no extra cost. 
Frame: the framework is made from hollow-section heavy-gauge steel tube and is a fully welded assembly. Supports are equally spaced at maximum 49" centers. The finish is powder coated in a colour of your choice in colour Vermont white ash, 3" x 1 1/4", and finished with a sustainable hard-wearing water-based lacquer. Timber slats are trimmed on site to the exact length to fit the desired space. 
Suitable wall types: solid walls of at least medium density blockwork. Note that it is possible to fix cantilever wall benches on timber stud or partition walls by fixing 24-mm plywood on top of the studs. 
Installation: on installation, the seat corner slats are mitred on site and steel plates are supplied to support the mitred joints. If shoetrays are required, they stop at the seat supports nearest the corners.

Additional Options 
Our Variset VZ7A-4 cantilever wall benches come with the option of shoetrays (Code VZ7B-4). These are made from heavy-duty angle frame and .1 inch wire mesh. 

Why choose this product? 
Our Variset cantilever wall benches come in two sizes – the narrower three-slat version, and this wider four-slat version. 

For an architect designing a sports pavilion, he or she may be faced with changing rooms that are not conveniently shaped, and have awkward corners that need to be fitted out. Not only is the finished look all-important, but also the client needs to be sure there are no dangerous gaps where users might catch their fingers, or dirt might be trapped. With the Variset design, the installer can easily mitre the slats onsite to provide a neat and safe finish. 

VZ7A-4 Bench

Finish Options


Technical Information Downloads

Seat depth 17".


No Restrictions for length.

bottom of page