Specifications
Dimensions: seat height 17 1/4"; seat depth 13"; length 51 1/2" – note that these are the standard option, and we can generally supply to your own requirements, often at no extra cost.
Frame: the framework is made from hollow-section heavy-gauge steel tube and is a fully welded assembly. Supports are equally spaced at maximum 49" centers. The finish is powder coated in a colour of your choice in colour combinations from the full RAL range.
Slats: slats are produced from sustainable Vermont white ash, 3" x 1 1/4", and finished with a sustainable hard-wearing water-based lacquer. Timber slats are trimmed on site to the exact length to fit the desired space.
Suitable wall types: can be used against non-solid walls.
Installation: on installation, the seat and shelf corner slats are mitred on site and steel plates are supplied to support the mitred joints. If shoetrays are required, they stop at the seat supports nearest the corners.
Additional Options
Variset VZ7 benches come with the option of shoetrays (Code VZ8). These are made from heavy-duty angle frame and .1 inch wire mesh. Other accessories include a security locking system and hanger numbering options.
Why choose this product?
The VZ7 is our standard narrow wall bench. It has supporting front legs, so can be used for non-solid walls where a cantilever bench is more problematic to install. As with all the Variset VZ range, these products can be mixed and matched. For example, a designer may specify one of our cantilever options. However, the installer may discover areas of weak walls. He or she then has the option of using this wall bench without changing the overall design.
One advantage of the range is its flexibility. We give wider options – for example, the four-slat VZ7-4 and the five-slat VZ7-5 – or alternatively, ask about our bespoke service.
VZ7 Bench
Finish Options
Dimensions
Technical Information Downloads
Seat height 17 1/4"; seat depth 13".
No Restrictions for length.