The series comprises eighteen different arrangements of seating and shelving with either captive hangers or hooks for clothes storage.

Free standing island and wall mounted units are available to suit a wide range of applications.

A module of 49-1/4", from center to center of bracket is the basis of the series. Special length units can be made to order.

Description and Specifications:

Steel Supports: 2-3/8 x 13/16 x .05 inch flat oval lozenge hollow section vertically and 2-3/8 x 3/4 x .05 inch rectangular hollow section horizontally in standards and seat supports. Available in black, white, brown, grey, red and yellow. Special colors available upon request.

Shoe Trays: 1-1/16 x 1-1/16 x .10 inch steel weldmesh, welded into frame. Colors to match frame. Hanger rail and tie rails: 1" OD wall .080" tubular steel.

Coat Hangers: 'UL' approved 'Noryl 215' fire resistant structural foam or 1/4" steel rod hangers.

Seat and shelf slats: 3" x 1-1/4" flat oval white ash in standard 101" and 51-1/2" lengths. Special lengths can be made to order.

Slats sprayed with two coats of acid catalyzed clear semi-matt lacquer, polished between coats. Steel slats may be substituted when conditions make wood unsuitable.

Installation Options

Units are delivered in components form for site assembly.

Brackets, standards and/or seat supports are fixed to the wall/floor at not more than 49" centers.

Wood slats for seats and shelves are fixed with round head screws. These slats are stocked in length to suit either single units at 51-1/2" nominal lengths or double units 101" nominal length.

For units longer than 101", slats will have to be butt jointed at a wall bracket/seat support.

All benches can be bolted to floor with supplied brackets.

Accessories

Adjustable feet and casters for free-standing units.

Corner plates for supporting wood when mitered in corners.

Numbering of hooks - Type VZ1 and VZ2 only.

Numbering of hangers.

Locking devices available.